1

Our full range of infra-red temperature sensors allows contact free temperature measurements which may be required typically for tyres.

Thanks to their reduced dimensions, the 2 types of boxes, M12 or Bloc T, allow easy installation of your application. The built-in electronics will make your work simpler.

The 150°C product is delivered with a linear output signal.

We recommend to our customers that they clean the infra-red sensor lenses with alcohol every day, this is particularly important for measurements carried out on tyres.

2

This Texense IRN2 miniature digital infrared allows contact free temperature measurement of objects several centimetres away by detecting the infrared rays emitted by these objects.Its reduced dimensions allow it to be integrated into production equipment or systems.

It operates independently with an analogue output.

The emissivity may be adjusted by programming the product via a USB cable.

Excellent precision for the 150°C and 300°C and 1000°C ranges with values in the region of 0.3% of the full scale.

The output signal is perfectly linear.

3

After a good success of our IRN8C, 8 channel infrared tire temperature sensor, Texys have worked for a while on a tire temperature sensor to work well with closed distance measurement and multi heads possibility.

The success of our IRN8C is well established in single seater applications as customer can install the sensors far from the tire.

Texys has been working on a multi channel sensor to match close distance installation, typically Le Mans, GT applications.

Furthermore, its flexibility allows to measure the surface and bead temperature in a same time. This measurement is interesting especially in NASCAR.

4

Texys is proud to release its new 4 ways thermocouple Amplifier, THN4x.

Based on the digital version of our patented thermocouple Connector/Amplifiers, that version brings high accuracy in a compact housing and delivers the 4 readings through the CAN Bus.

On the CAN side, several parameters are user configurable :

  • Baudrate, emission frequency, ID, °C/°F.
  • The product is designed in line with dimensions 80 x 33 x 11mm.
  • 5 to 16V supply voltage and Operating temperature - 20 to 100°C allow the use of THN4x for embedded testing.
  • Texys has been working constantly on temperatures measurement creating a range of Infrared sensors but also Thermocouple amplifiers.

    The new THN4x is a logical step of our expertise in Thermocouple Temperature Measurement.

    NB: a 24V supply voltage version is now available

    5

    By virtue of its dimensions, characteristics and compatibility with gyroscopes, this 3 axis accelerometer allows the dynamic behavior of the vehicle to be interpreted and checked.

    The temperature compensation between - 20°C and 100°C allows our accelerometer to be used in extreme conditions.

    Our capacitive type 3 axis accelerometer, with a frequency range of up to 100 Hz, allows measurement of the acceleration of the constituent parts of the vehicle. The measuring range is from +/-5 to +/- 20G.

    6

    By virtue of its dimensions, characteristics and compatibility with gyroscopes, this accelerometer allows the dynamic behavior of the vehicle to be interpreted and checked.

    Combining temperature compensation at 80°C and hightly compact size, the Texense 1 axis GAS accelerometer allows to our customers an easy installation and using with most severe conditions.

    Our range GAZ type, has a wide range of applications:

    The GAS type accelerometer, with no resonance and a reduced frequency range, is ideal for measuring general vehicle behaviour. For this type the measuring range is from +/-1 to 10G

    We make 1 axis accelerometers.It is also possible to combine 2 boxes to make a 3 axis accelerometer.

    For example : One 2-axis Gas type accelerometer +/-5G ( vehicle X and Y) and one 1-axis, GAS type accelerometer , +/-10G (vehicle Z)

    7

    This gyroscope allows the dynamic behaviour of the vehicle to be interpreted and checked by giving the 3 angular speeds. Yaw, Pitch and Roll.

    Its compact size and squared shape is ideal to enable the installation for embedded testing.

    The compensation temperature up to 105°C enables our gyroscope to be used in extreme conditions.

    Customer selects with order the range of each of the axis.

    Example: 50°/s for the pitch, 100°/s for the Yaw and 150°/s for the Roll.

    This would cover most of the applications in Single-seaters, Touring Cars, Rallye, Endurance and Motorbikes.

    The design allows our accelerometer range (1,2 or 3 axis) to be fitted on the gyroscope housing to build your inertial box.

    8

    After the success of our analog version, we are happy to release our new 6-axis IMU with CAN output.

    The electronic of this CAN unit is based on our analog IMU so composed by:

  • 2 axis gas accelerometer for lat/long measurement
  • 1 axis cap accelerometer for vertical measurement
  • 3 times single axis gyroscope
  • Different ranges are available (see spec sheet). Also, on request, Texys is able to provide a customized version with full gas damped or capacitive technologies.

    The CAN parameters are programmable by the end user (IDs, baudrate, emission frequency)

    9

    This new XN4 amplifier is an upgrade of our current XN3 amplifier.

    The big improvements on the XN4 compare to our XN3 are:

  • Gain and Offset are now programmable even if XN4 is not linked to Strain Gauges. (Offset is programmable in mV and Gain in 1/10 ( Gain from 70 to 1250)
  • Offset value from 0 to 5V
  • Ouptut signal can increase or decrease under load
  • No need to apply a force to program a Gain
  • Temperature compensation is now in time basis, from 2 to 12hours
  • Compensation table values can be edited
  • Working temperature is now from -20 to +125°C (instead of 0 to +120°C for the XN3)
  • Noise reduction
  • Most of the amplifier parameters (as gain and offset) are programmable by the end user just via a USB Connect and a laptop.

    10

    The Texense TPMS system consists of powered wireless pressure sensors fitted to a wheel rim which send data over an RF link to a compact data logger (RCU - Receiver Control Unit) placed within the car.

    The transmission mode automatically changes when an acceleration is detected.

    The RCU data logger stores (flash memory) or sends data's (real time transmission) to the car acquisition module via CAN line or analog wires.

    Our TPMS system, small size and easy to install, can provide reliable data offering consistent performance benefits at all levels of motorsport.

    11

    Texys has launched its new device to convert 8 analog and 2 digital inputs to CAN.

    This solution is an upgrade of our previous version of Analog to CAN converter with Sub-D connector. The V2 is made with an integrated LEMO connector to secure a waterproof installation.

    The Ana to CAN V2 is also now able to use both CAN 2.0A and 2.0 B.

    A filter and a flying lead version are available in options. (note: filter is programmable between 15 to 250Hz)

    12

    Our "Racing series" range of infra-red temperature sensors allows contact free temperature measurement for requirements which typically include tyres, disc brakes...

    With its reduced dimensions, the box for this Racing Series range allows easy installation of your application. The built-in electronics make your work easier.

    This sensor have met a great success in formula student teams.

    The 800°C products are delivered with a linear output signal.

    We recommend to our customers that they clean the infrared sensor lenses with alcohol every day.

    13

    Typically, rotary potentiometers are used to measure angle positions in gear boxes, pedals, steering wheels and throttle valves.

    The Texense RPS have been specially designed to perform in the most arduous and extreme conditions.

    Different versions are available:

  • round shaft
  • blade shaft
  • Aluminium housing
  • 14

    The Texense VMLS have been specially designed to perform in the most arduous and extreme conditions. Its execellent linearity and temperature range up to 100°C allow you to have the best suitable measures in the most adverse working conditions.

    Our full range of potentiometers allow different measurements such as gear position, throttle position or suspension movement.

    Available in the following ranges : 25mm/50mm/75mm/100mm/150mm/200mm/250mm/290mm